Vertere Imperium Precision Motor Drive

Based on the top-end Reference Motor Drive and featuring a simplified power supply and control functions, the Imperium by Vertere Acoustics enhances musical performance and brings the experience of listening to vinyl on the RG-1 or SG-1 closer to the original master.

The Imperium Precision Motor Drive takes control of the record player motor, provides it with smoother drive, as little noise as possible, and lower distortion.

Its internal circuit, as with the reference motor drive, is uniquely microprocessor based providing a pure sine wave in the digital domain and then converted to analogue via an on-board DAC. Two waveforms are derived, a cosine and a sine, which are then amplified using two bridged amplifiers to power the motor.

The music we hear when playing vinyl records, in reality, comes from the motor! The motor is the only source of energy in the system. It is this energy that drives the record past the stylus thus making the music we hear.

Any amount of noise or fluctuation in the drive system will adversely impact on the music. Detail, dynamics, timbre, timing and musicality are just some of the qualities that will suffer as a result.

Exceptional attention to detail has been given to the whole design, including a gold-plated two-layer PCB utilising extensive ground planes, fully regulated voltage rails powering different circuit sections, and carefully selected components, ensure in-control and ‘clean’ final delivery of power to the motor.

The PCB mixes SMD and thru-hole components using the best of both technologies. Copper foil shields the entire digital, microprocessor and DAC circuitry is first, and then the whole PCB is secondarily shielded using a stainless-steel shield plate.

The double-screened programmable, update-able microprocessor digitally generates the sine and cosine waves (which are switchable to be ±0, 0.25%, 0.5%) to the equally double screened DAC. The output of the DAC feeds two power amps provided by an extremely clean supply to drive the approximately 17V the motor requires.

The motor drive output is a high-quality gold plated 7-way thread-locked DIN connector, connecting Imperium power to the record player via a dedicated motor link cable.

Technical Specifications

Technology: Microprocessor Controlled, Programmable Motor Drive, Power Supply + Main Circuit on Gold Plated PCB
Input Power: 100-120V or 220-240 Vac (50/60 Hz)
Internal Power Supply: Linear, Int. Switchable, Fully Regulated Main Power Rail, Plus two further Regulated Supplies
Output Drive: Bi-phase Bridged Amplifier
Output: Precision Sine & Cosine Waves
Speed Selection: 33 & 45 rpm
Speed Adjustment: -0.25%, -0.75%, 0.0, +0.25%, +0.75%
Output Adjustment: 33 & 45 Phase Angle & Level
Output Voltage: 17.5 Vac rms (Two Phases)
LED Illumination Output: 12 V DC (Fixed)
THD+N: <0.08 %
Circuit Shielding: Triple Shielded
Motor Link Cable: Dedicated Two Phase + LED Power
Power Consumption: <30 Watts Max.
Dimensions (D x W x H mm): 245 x 214 x 58 (including Selector + Feet)
Weight: 2.6 kg
Supplied With: Motor Link cable, Redline Mains Cable (2 m)