The Amplifier Technologies AT1820 Series of amplifiers meet the needs of home audio systems, providing multi-channel options between two channel and seven channel offerings for home theatre requirements. The ATI AT1820 Series multi-channel power amplifiers deliver 200 watts per channel in to 8 ohms and 300 watts per channel in to 4 ohms, providing tremendous value, performance and reliability.
All ATI AT1820 Series amplifiers feature ATI’s Soft Turn-on protection. The Soft Turn-on circuit gradually powers up the amp to avoid tripping the circuit breaker or dimming the lights. At the back of the amplifier, an RCA unbalanced input, an XLR Balanced input, input selection switch and a pair of gold-plated, 5-way binding post outputs support each channel. There is also a 1/8” mono mini jack for +12V trigger, a gold-plated chassis ground lug, a fuse holder and an IEC 20 Amp inlet for the provided detachable power cord.
AT1820 Series amplifiers are passively cooled with large heat sinks for efficiency and low noise operation. Featuring toroidal transformers with bi-filar windings ensures low noise and crosstalk, hallmarks of all ATI amplifiers.
Technical Specifications:
Remote Trigger: Activated from 3.3VDC to 24VDC
Protection Circuits: Optically – coupled with full automatic reset.
Toroid Transformers: 40% more efficient than EI type. Separate bi-filar windings for each channel guarantee lower noise and crosstalk.
Circuit Boards:
Double-sided FR-4 glass epoxy, computer-grade boards are assembled in California.
Soft Start Circuitry: Soft-start minimizes in-rush current. Multiple units can be turned on without tripping circuit breakers, eliminating the need for turn-on sequencing.
Power Transistors: High current, bi-polar output transistors ensure optimized performance in real time.
Power Supply Capacitance: 22,400uF per channel.
Warranty: 7-Year Warranty for Parts and labour against defects in parts or workmanship.
Number of Channels: 2-7
FTC Full Bandwidth Power Output@ 8Ω (Watts RMS): 200
FTC Full Bandwidth Power Output@ 4Ω (Watts RMS): 300
Input Sensitivity for Full Rated FTC Output Power – 8Ω: 1.6 Volts
Frequency Response: +0, -.5dB, 5Hz to 20kHz, load independent
Signal-to-Noise Ratio (Ref FTC Rated Power, A-Wtd): >120dB (A-weighted – Ref. 8Ω FTC Power)
Total Harmonic Distortion + Noise (20Hz – 20kHz): <0.03%
Intermodulation Distortion: <0.03%
Recommended Load Impedance: 8Ω Nominal, Stable into 4Ω
Damping Factor: >400 from 10Hz to 400Hz
Crosstalk: >-100dB from 20Hz to 20kHz
Voltage Gain (RCA Inputs): 28.5dB ±0.5dB
Voltage Gain (XLR Inputs): 27.5dB ±0.5dB
Slew Rate: > 50V / μS
Input Impedance: 28 kΩ Nominal
Output DC Offset: <±15mV
Power Requirements: 230V; 50/60 Hz
Power Consumption (Standby): ≤0.5W (240 VAC)
Power Consumption (Idle): 240VAC; 50/60 Hz
Chassis Dimensions (W x H x D) mm:
AT1822-AT1824: 432 x 196 X 372
AT1825-AT1827: 432 x 196 x 448
Net Weight (kg):
AT1827: 43.3
AT1826: 43
AT1825: 35
AT1824: 35
AT1823: 23.7
AT1822: 20.1
Shipping Weight (kg):
AT1827: 48.6
AT1826: 48
AT1825: 41.8
AT1824: 41
AT1823: 26.4
AT1822: 23.2
| Brand | |
|---|---|
| Finish | Black |
You must be logged in to post a review.















Reviews
There are no reviews yet.