The Rega Brio Integrated Amplifier is a new improved version of the Rega Brio-R. The fully aluminium two-part case boosts the Brio’s heatsinking capabilities and improves on Rega’s already solid build quality and reliability.
The Rega’s new Brio also has the capability to drive standard hi-fi headphones from the internal amplifier. Rega have used the same switch that deactivates the main speakers seen in other-higher spec Rega amplifier models, This reduces the impact that the headphone input has on the main signal path in order to not disrupt the overall sound quality.
Rega have also improved the circuit design. This includes a fully upgraded PCB layout enabling the Brio to handle higher specifications for all critical parts, they have added a second raw power supply in order to provide further isolation between the output stage and the driver stage/line and phono amplifiers, further improving the isolation between high and low level signal stages of the amplifier.
Higher specification MUSES operational amplifiers have also been used in the line and phono amplifier.
Weight | 6.2 kg |
---|---|
Dimensions | 440 × 370 × 140 mm |
Input sensitivities for rated output level: | Input 1 (phono) input sensitivity = 2.1mV at 47KΩ in parallel with 220pF. |
Power outputs at 230/115V supply voltage: | 50Watts RMS both channels driven into the rated load of 8Ω |
Headphone output: | No load = 8V |
Power consumption: | 195Watts at 230V/220V/115V/100V into the rated load of 8Ω |
Record output level: | Record output level (with rated input levels) = 210Mv. |
Frequency response: | Phono 15Hz to 40KHz (-3dB Points) / 27Hz to 20.5KHz (-1dB Points) |
Fuse ratings: | T2AL 250V – 230V/50Hz and 220V/60Hz |
Brand |
You must be logged in to post a review.
Reviews
There are no reviews yet.